by: Ozone
$ 1,499.99 $ 2,100.00
Ozone Subzero V2 Kite COMPLETE KIT WITH CONTACT SNOW BAR V5 AND APPROPRIATE LINES AND BAG 11.0 sq m - Orange/White
The Subzero V2 is the ultimate performance Snowkite for a wide variety of riders. Whether your passion is Freeride or Backcountry missions the Subzero has you covered!
The V2 is designed with some of the lightest materials available on the market, offering true performance increases and enhanced flying characteristics across all aspects. It inflates quicker, launches in lighter winds, flies faster, stays in the air longer in gusty conditions and is more reactive even in the lightest breeze.
The planform and profile combination delivers superior stability in flight, even when bashed by gusty winds. The optimized strap positions distribute load evenly throughout the sail, translating to smooth, predictable power delivery and snappy handling. Reduced bar pressure and lighter steering forces will let you ride all day without fatigue and intensify the feeling of a light kite.
The Subzero has paved the way for the adventurous to push the boundaries of backcountry riding. It has incredible potential due to its fast direct handling and amazing power generation in light winds, but also big de-power in strong winds.
The Subzero’s enhanced stability makes difficult backcountry rides and mountain climbing more accessible and enjoyable. Combine that with our revolutionary Internal Re-Ride Release System and you have the quintessential backcountry Snowkite.
The Subzero V2 ships with a lightweight Compressor Bag to keep the kite packed and secured as small as possible. We recommend adding the Technical Mountain Bag to carry multiple kites and all your essential gear on longer backcountry missions.
Our unique Internal Re-Ride Release System is the market leading Snowkite release and landing system. It has made mountain climbing and packing so much more enjoyable, safe, easy and quick for the user. When activated the kite de-powers instantly without tangling, and will sit on the ground ready to re-launch when you’re ready again.
Another advantage of our Internal Re-Ride Release System is the land and secure option. To land the kite simply pull the 5th line until you reach the Secure Loop which can be found approx 2m up from the control bar. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground – it can be hooked onto the kite leash clip, or slipped over the bar end. This makes landing and packing your kite safe and easy even in high winds. The Brake Handle spanned between the back leader lines on the control system makes reverse launch and light wind landing easy.
World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory manufactures all our Kites, Wings, Boards, Hydrofoils, Paragliders, Speed Wings and Accessories - the same Quality Control processes are used across all products.
The FUTURE is NOW - All Ozone kites and wings are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with features specifically tailored to the unique forms and structures of technical inflatable and foil kites and wings. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our products continues.
Our unique Internal Re-Ride Release System is the market leading Snowkite release and landing system. It has made mountain climbing and packing so much more enjoyable, safe, easy and quick for the user. When activated the kite de-powers instantly without tangling, and will sit on the ground ready to re-launch when you’re ready again.
High quality Ultra Light materials have been used extensively on our Kites and Paragliders since 2011. Using Ultra Light materials translates to true performance increases - the kite inflates quicker, flies faster and is more reactive even in the lightest breeze.
Using high spec low friction Ronstan Orbit pulleys to reduce wear and rider fatigue while improve feeling and performance of the kite.
Flexible lightweight plastic battens are precisely positioned at each Leading Edge cell opening. The battens enhance structure of the openings, this means quicker and easier inflation.
Internal span-wise straps work in unison with optimized diagonal ribs, distributing load from the bridles evenly and effectively. This increases the internal structural balance, while allowing the top and bottom surfaces to maintain the designed profile without being distorted from indirect tension or loads.
High quality, low stretch sheathed Dyneema bridle lines for maximum strength and performance. This is the same bridle line we have used on our Snowkite range for the past 10 years.
The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any snow or debris as this will prolong the life of the kite and help it fly as designed.
Fool proof line connectors prevent incorrect rigging of the flying lines to the kite.
We work extensively during our R&D process to develop the size range to feel in tune with each other. Every kite has a unique bridle layout, individually tested and fine-tuned to maximize the feeling and performance.
Speed System and Bridle Line Maintence Guide
We stock these but also can special order other Ozone products models and colors. ESTIMATED CURRENT MANUFACTURING TIME for special orders is 12-16 DAYS
$ 159.99 $ 199.99
2023-24 Model. Black/ Yellow RB Cruiser is an urban skate designed for tough, fast maneuvering. RB molded boots are durable in all skating environments, featuring four urban profile 80mm/85a Urban Profile wheels and SG7 bearings for added control, stability and speed. Ultimate lateral support and sliders, a dual-buckle/lace secure closure...
$ 59.95 $ 64.99
World Record Breaker! Rollerblade Twincam ILQ-9 Bearings, Specially designed for inline skaters, The Twincam ILQ-9 Pro bearings have an exclusive 6-ball design and SCRS shield system to prevent contaminates from entering the bearings. Long lasting, built with cutting edge components and lubricated with TK racing gel (made in USA) to make...
$ 49.99 $ 59.99
Finally a solid brake for the 125mm or 110mm Rollerblade 3WD Frames. Includes Rollerblade axles. Will work on other 3 wheel skates like Seba, Powerslide, etc with modification. Rollerblade's description: The 3WD Brake Support was designed for those who want a brake on their Rollerblade® 3x125mm Marathon frame or 3x110mm Urban frames....
$ 20.00 $ 21.95
The Rollerblade High Performance Socks are a perfect technical sock created with a variety of materials to ensure you are at your most comfortable when out skating. Not only are they comfortable but they also feature an anti-microbial property that reduces odors making your feet smell a little better after...