- Continue Shopping
- Your Cart is Empty
Cruisers & Penny Boards: Hardware & Tools
Skateboards / Cruiser & Penny Boards / Carver Skateboards / Skateboard Protective Gear
Complete Cruisers / Replacement Parts / Hardware & Tools
1" Shop Skateboard Hardware
Sold Out - $ 3.99
1" Shop Skateboard Hardware
Allen Wrench Set 2 Pack
$ 2.95
2 Steel Allen wrenches perfect for working on your skates. Fits both the small soul plate and backslide hardware as well as all frame and mounting hardware. Sold in pairs
Black Diamond Dirt Remover (Grip Cleaner)
$ 7.99
So fresh and so clean! Black Diamond’s Dirt Remover gummy cube can help keep your board looking newer, performing better, and your kicks cleaner while you're out riding. Rub Diamond Dirt Remover across griptape in long, firm strokes. Cube measures 4.5” x 1.5” x 1.5”. The Diamond Dirt remover is...
Black Diamond Skate Rails
$ 8.99
Pack of 2 14.5" Rails with 8 Wood Screws
Black Magic Griptape Eraser/Cleaner
$ 5.99
Clean that gunk off your griptape with the BlackMagic Griptape Eraser.
BRONSON BLACK SKATE TOOL
Sold Out - $ 11.95
Bronson Speed Co. Next Generation Bearing Saver Skate Tool The first and only skate tool designed to prevent shield damage that can occur when installing your bearings or adjusting your axle nut.Engineered by Bronson Speed Co. to ensure bearing performance and precision.
Caliber Large Cupped Washer Pack of 2
$ 3.00
Replacement Caliber washers
Carver Pipe Wrench: Carver Skateboard Tool
$ 23.99
This universal pocket shop measures in at under 2½" in length, so it's easy to bring along on a session for on-the-fly adjusting. Made of tool grade stainless steel, it won't rust, break or wear out, guaranteed. The Allen key snaps on with a powerful neodymium magnet.A great mini skate...
Independent Bearing Saver T-Tool Skate Tool Black
$ 24.95
The Independent Genuine Parts Best skate tool has a patented design and is the only tool you'll ever need for assembling and disassembling a skateboard. Features: 9/16" Socket1/2" Socket3/8" Sockets7/32" & 1/8" Allen Wrenches,#2 Phillips DriverBearing Press / Puller5/16" Axle Re-Threader
Independent Genuine Kingpin Nuts (pair)
$ 1.50
A pair of kingpin nuts made for Independent skateboard trucks
Independent Genuine Parts Best Skate Tool
$ 24.95
The Independent Genuine Parts Best skate tool has a patented design and is the only tool you'll ever need for assembling and disassembling a skateboard. Features: 9/16" Socket1/2" Socket3/8" Sockets7/32" & 1/8" Allen Wrenches,#2 Phillips DriverBearing Press / Puller5/16" Axle Re-Threader
Independent Phillips Black Hardware Pack 1"
$ 3.99
1 Pack of Independent Phillips head black hardware, one inch long (1")
Inline 6 MM Allen Key
$ 1.00
This allen key fits most aggressive frames. nice and compact. you can fit them in your pocket. (only one key is included)
Landyachtz Skateboard/Longboard Hardware
$ 4.00
The nuts and bolts that keep your setup together.
Loaded Button Head Hardware
$ 7.00
Made from an extremely strong steel (significantly stronger than Grade 8), these flange head bolts integrate the washer into the bolt itself in order to reduce the height of the bolt heads while still distributing load pressure.Our hardware comes with a hex key and is available in three (color coded)...
Loaded Countersunk Head Hardware
Sold Out - $ 7.00
Got that sinking feeling again? Loaded will only make it worse. New, super strong countersunk flat head hardware. They included little bumps on top to further stick you to your deck. Guaranteed to smell like grease.
Mini Logo Single Replacement King Pin
$ 1.50
Single replacement king pin Universal Fit - 2" overall length
Modus Skateboard T-Tool
Sold Out - $ 15.99
This universal pocket shop measures in at under 2½" in length, so it's easy to bring along on a session for on-the-fly adjusting. Made of tool grade stainless steel, it won't rust, break or wear out, guaranteed. The Allen key snaps on with a powerful neodymium magnet.A great mini skate...
Moxi Vice Versa Universal Skate Tool
$ 5.00
The Original Vice Versa Universal Skate Tool was designed to quick tightening on the go! Named after Long Beach Roller Derby's Vice Versa, this cute compact tool tightens the bolts on your wheels and fits conveniently on you key ring. Awesome for street skating, outdoor skating, or any skating adventure....
Paris Skate Tool
$ 15.95
Want a snazzy Paris Skate tool to match your Paris Trucks? Here it is! Broken apart it is compact and easy to toss in a pocket while skating, no sharp points exposed to impale you in the off chance you take a spill and happen to land on wherever you...
Paris V2 150mm 50° Trucks Set of 2 - Multiple Colors
Sold Out - $ 46.00
Paris V2 150mm, 50° The Paris 150mm trucks are your go-to carving truck. If you're looking to cut some serious turns and get your swerve on, then these babies are for you. The 150mm hanger allows for quicker turning and greater leverage when compared to a wider hanger. The 50°...
Paris V3 150mm 50° Trucks Set of 2 - Multiple Colors
$ 52.00
Paris V3 150mm Looking to cut some serious turns and get your swerve on? Look no further! The Paris V3 150mm trucks are your go-to carving truck. The narrow hanger allows for quicker turning and increased leverage compared to a wider truck. The 50° baseplate provides a excellent balance of...
PowerDyne Bearing Hand Tool
$ 15.00
The PowerDyne Bearing Hand Tool is designed to make installing and removing bearings in nylon-hub and no-hub wheels a cinch. Because this metal tool works by slightly bending the hub of the wheel during installation and removal, it is not recommended for use with metal- or aluminum-hubbed wheels. Solid metal...
PowerDyne Y3 Skate Tool
Sold Out - $ 19.99
Ergonomic Design Non-slip Grip 9/16" Socket for King Pin Nut 1/2" Socket for Wheel Nut 15/16" Open-end Wrench for Adjustable Toe Stop
PowerDyne Y4 Skate Tool
$ 22.00 $ 25.99
PowerDyne Y4 Skate Tool The PowerDyne Y4 Skate Tool features four tools in one! This versatile skate tool includes a 1/2” socket for axle nuts, an 11/16” socket for truck adjustment locknuts on PowerDyne Reactor Series plates, a removable 9/16” socket for truck adjustment locknuts, and finally a 5mm T Handle Allen...
Powerslide Pro Skate Tool - Powerslide Ergo Tool - Multiple colors
$ 29.95
The powerslide skate tool features the standard allen wrench as well as a bearing puller and pusher. This tool from Powerslide has a nice grip to make things easier when pulling/pushing bearings. Also equipped with both an allen wrench, or flip it around to use the torx head which is...
Reflex Skate Tool
Sold Out - $ 22.95
The Reflex tool does it all. From pressing bearings to re-threading truck axles and everything in between, you can't go wrong with this tool. Complete with7/2", 9/16" and 3/8" sockets, clip in hardware tool with both allen and phillips head. The Utilitool is also the first tool to introduce a...
Shop 1 1/2" PHILLIPS Truss Head Hardware
$ 5.99
1 1/2" Phillips Truss Head Hardware Packs 8 Bolts 8 Nuts
SHORTY'S Longboard Hardware (1 1/8" and 1 1/4")
$ 3.99
Standard hardware for your trucks and board. Comes with 8 bolts, 8 nuts, and a Shorty's sticker.
Silver Ratchet Skate Tool - Multiple Colors
$ 21.99
The Silver Tool is the perfect tool for complete skate assembly with quality craftmanship and versatile features including the exclusive hardware ratchet, slide out screwdriver, detachable allen key and precision file. Two way ratchet system. Griptape file. Kingpin and axle tool. Kingpin allen attachment. Slide out screwdriver attachment. The Silver...
Single Replacement Axle Nut
$ 0.50
Single replacement nut for skateboard trucks
Skate Hardware Allen Key
$ 1.00
This is your standard allen key that fits all Skateboard Hardware. These little guys can fit comfortable in your wallet, pocket, and shoes . Allen key hardware is the way to go. Its almost impossible to strip unless your acting like the Hulk.
Standard Flat Washer Black (10 Sae) 8 pack
$ 1.00
Standard Flat Washer Black (10 Sae) Skateboarding Hardware. Protects your deck. Includes 8.
Standard Lock Nut Black (10-32)
$ 1.00
Skateboard mounting hardware is a set of eight 10-32 bolts, usually with an allen or philips head, and matching lock nuts. Skateboard hardware is used to attach the skateboard trucks to the deck. Length of hardware will depend on risers.
Standard Panhead Phillips Bolt 1-1/2"
$ 2.50
Standard Panhead Phillips Bolt 1 1/4" Skateboarding Hardware. Includes 8 bolts.
STANDARD PANHEAD PHILLIPS BOLT 1-1/4"
$ 4.00
Standard Panhead Phillips Bolt 1 1/4" Skateboarding Hardware. Includes 8 bolts.
Superior Alan Hardware Pack 1.0"
$ 2.50
One pack contains 8 pieces of hardware. Enough for 1 board.
Superior Phillips Hardware Pack 1.0"
$ 4.50
One pack contains 8 pieces of hardware. Enough for 1 board.
Unit Skate Tool
$ 12.00
The Unit Skate Tool features a 9/16" socket for trucks, a 1/2" socket for axles, and a 3/8" socket for hardware, as well as a phillps' and allen slide-out screwdriver.
© 2021 THURO // 362 Boylston Street, Brookline, MA // 617-501-6389
