Designed to provide a lively and energetic ride, Nipples will revitalize any setup for carving, pumping, dancing, freestyle and freeride.
Nipples are poured in Orangatang's extremely high rebound Randy Urethane formula. They stumbled on this urethane a few years ago while testing ultra high rebound formulas for wheels, but found this urethane to actually be too high rebound for a wheel urethane. Perfect for a bushing.
Outer diameter: 1 inch
Height (top/roadside): 0.56 inch
Height (bottom/boardside): 0.66 inch
The bottom bushing carries most of the rider’s weight, so it is compressed more than the top bushing. The top bushing engages mostly when the rider leans in one direction to turn. To account for this difference in loading, the bottom bushing was made slightly taller than the top. Both top and bottom barrels are beveled on one edge for a better fit with large cupped washers (such as the stock parts on Paris and Tracker Racetrack trucks). However, flat washers are recommended in general (see below).
The first round of Nipples are packaged in sets of four bushings (two bottom barrels and two top barrels) and include four flat washers.
The first release of Nipples will feature three hardness ratings: soft, medium, and hard. These are roughly equivalent to ratings of 85a, 87a, and 89a on the Shore A durometer scale. The reason Orangatang chose to use a relative hardness scale for their bushings is that Nipples feel and respond differently than many equivalently rated bushings, due to their dimensions. The Nipples feature a slightly larger-than-average diameter that is intended to provide more leverage against the hanger and more meaty volume to compress in every turn. Combined with a double barrel configuration, this allows for a predictable initiation and very consistent resistance throughout the hanger’s travel, even in softer durometers.
Recommended weight ranges for lower speed (under 20 mph) riding are below. For faster riding, we recommend going harder.
Soft (orange): 80-180 lbs / 35-85 kg
Medium (purple): 160-230 lbs / 70-105 kg
Hard (yellow): 200-270 lbs / 90-125 kg
With BONES HardCore Bushings™, you will notice a number of positive improvements in the performance of your trucks. There is no break-in period. Just put them in, adjust and skate. Your trucks will be more responsive. Increased truck performance Improves your skating experience. Your turns will be smooth and positive, not...
Divine Standard Bushings come with one barrel bushing to keep those grips prime, and one cone to keep those slides prime.
Sold Out - $ 4.95
The Independnt Truck Bushings Medium from Independent Truck Co. You get 4 bushings enough for two trucks. High rebound Cushions. Accept no substitutes.
Upgrade your trucks with Mini Logo Bushings! These 100% urethane, high-rebound bushings will make your skateboard come alive! Universal fit and sold per truck, Mini Logo Bushings allow you to affordably dial in the turning of your trucks through mix and matching different hardness. Features: 100% Urethane Universal Fit Sold...