Caliber II Longboard Truck Set Satin Gold 50 Degree

by: Caliber

UPDATED INNER/OUTER STEPS ON BUSHING SEAT

The new Inner-Step provides an increased contact area with the bushing, resulting in dramatically higher rebound and overall responsiveness. The Inner-Step diameter has been adjusted to 25.4 mm to eliminate all slop.

The new Outer-Step is now a perfect circle with a  31.5mm diameter, creating a perfect no-slop-fit with  oversized aftermarket bushing combinations. 

 

PIVOT WITH TIGHTER TOLERANCE AND UPDATED CHAMFER

By decreasing the pivot cup seat chamfer, we have increased pivot cup surface area contact with the baseplate. This creates a snugger fit for the pivot pin and prevents side-to-side play as the pivot cup breaks in.

 

CIRCULAR KINGPIN HOLE WITH UPDATED DIAMETER

With a diameter of 17.4mm, the kingpin hole has been updated to match the specs of our precision trucks. A circular hole provides a consistent and uniform lean, while also allowing proper clearance to avoid kingpin bite on the hanger.

 

INCREASED TRUCK STRENGTH

With a new in-house heat treatment process at Caliber's manufacturing facility, they are able to strengthen the trucks by as much as 40%

 

PRESSED-IN GRADE 8 HEX HEAD KINGPIN

They have removed all slop and play by switching to a  pressed-in kingpin. This provides maximum  control and responsiveness through corners, but can still be hammered out and replaced with different length removable kingpins for extra levels of customization.

 

REINFORCED BASE PLATE

They have reinforced the baseplate by thickening the metal towards the kingpin. This provides increased strength and resistance against high speed impact.

 

THINNER PAINTS FOR TIGHTENED TOLERANCES

Powder coats are very thick and can throw off  tolerances and affect overall truck performance. Caliber have switched over to a thinner paint system for optimal performance.


Collections: Longboard Trucks, Longboards, Shreds

Category: Caliber

Type: Longboard Trucks




Other Customers Bought